Série 33
Non-pressurized hatches P33-150
P33-150 / P33-230 / P33-330 / P33-430 / P33-530 / P33-630
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel 2B plate 1.4301 / 1.4307 or 1.4404, height 80 mm, thickness 2 mm, usable passage with tolerance of /- 2 mm.
- Standard finish: exposed vertical weld, electropolished.
- Sheet 2B 1.5 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Stainless steel 1.4301 or 1.4307.
- Technopolymer handwheel with brass insert.
- Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department
Technical data
| DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
| P33-150 | 145 | 80 | 2 | 168 | 262 | 3 | NA | NA | 0,4 | NA | sticked | ||
| P33-230 | 220 | 80 | 2 | 175 | 338 | 4 | NA | NA | 0,1 | NA | sticked | ||
| P33-330 | 300 | 80 | 2 | 175 | 417 | 5 | NA | NA | 0,1 | NA | sticked | ||
| P33-430 | 393 | 80 | 2 | 175 | 515 | 6 | NA | NA | 0,05 | NA | sticked | ||
| P33-530 | 500 | 80 | 2 | 175 | 618 | 9 | NA | NA | 0,05 | NA | sticked | ||
| P33-630 | 600 | 80 | 2 | 175 | 718 | 11 | NA | NA | 0,05 | NA | sticked | ||
