Série 33
Non-pressurized hatches P33-196
P33-196 / P33-301 / P33-401 / P33-501 / P33-601
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel 2B plate 1.4301 / 1.4307 or 1.4404, height 80 mm, thickness 2 mm, usable passage with tolerance of /- 2 mm.
- Standard finish: exposed vertical weld, electropolished.
- Sheet 2B of 1.5 mm (196, 301, 401), 2 mm (501, 601) stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Stainless steel 1.4301 or 1.4307.
- Technopolymer handwheel with brass insert.
- Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department
Technical data
| DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
| P33-196 | 200 | 80 | 2 | 130 | 271 | 3 | 4 | NA | NA | 0,6 | NA | sticked | |
| P33-301 | 300 | 80 | 2 | 130 | 383 | 3 | 5 | NA | NA | 0,3 | NA | clipped | |
| P33-401 | 400 | 80 | 2 | 130 | 536 | 4 | 8 | NA | NA | 0,3 | NA | clipped | |
| P33-501 | 500 | 80 | 2 | 130 | 582 | 5 | 10 | NA | NA | 0,25 | NA | clipped | |
| P33-601 | 600 | 80 | 2 | 130 | 735 | 6 | 12 | NA | NA | 0,1 | NA | clipped | |
In the same category
