Série 31
Non-pressure Aseptic Traps P31-935
P31-935 / P31-1235 / P31-1435
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel sheet 1.4301 / 1.4307 or 1.4404, height 100 mm, thickness 3 mm, usable passage with tolerance of /- 2 mm.
- Standard finish: electropolished
- Sheet 2B of 1.5 mm (935), 2 mm (1235, 1435) stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Stainless steel 1.4301 or 1.4307.
- Flywheel or eccentric clamping lever in shiny chromium-plated brass-technopolymer flywheel with brass insert.
- Stainless steel flywheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department
Technical data
| DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
| P31-935 | 900 | 100 | 3 | 135 | 995 | 10 | 31 | NA | NA | 0,1 | NA | saddle | |
| P31-1235 | 1200 | 100 | 3 | 172 | 1340 | 15 | 35 | NA | NA | 0,01 | NA | saddle | |
| P31-1435 | 1400 | 100 | 3 | 172 | 1540 | 18 | 41 | NA | NA | 0,01 | NA | saddle | |
In the same category
