Série 31
Non-pressure Aseptic Traps P31-200
P31-200 / P31-300 / P31-400 / P31-500 / P31-600
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel sheet 1.4301 / 1.4307 or 1.4404, height 100 mm, thickness 3mm, usable passage with tolerance of /- 2 mm.
- Standard finish: bead blasted, exposed vertical weld
- 3 mm 2B sheet in stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Stainless steel 1.4301 or 1.4307.
- Technopolymer flywheel with brass insert.
- Stainless steel flywheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to see with the sales department.
Technical data
DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
P31-200 | 200 | 100 | 3 | 195 | 338 | 5 | NA | NA | 0,8 | NA | saddle | ||
P31-300 | 300 | 100 | 3 | 195 | 441 | 8 | NA | NA | 0,3 | NA | saddle | ||
P31-400 | 430 | 100 | 3 | 195 | 575 | 11 | NA | NA | 0,2 | NA | saddle | ||
P31-500 | 500 | 100 | 3 | 203 | 651 | 13 | NA | NA | 0,1 | NA | saddle | ||
P31-600 | 595 | 100 | 3 | 235 | 734 | 15 | NA | NA | 0,05 | NA | saddle |