Série 35
Powder Doors P35-418
P35-418
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel plate 1.4301 / 1.4307 or 1.4404, height 25 mm, thickness 5 mm, useful passage with tolerance of /- 2 mm.
- Standard finish: electropolished
- Sheet 2B 1.5 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Inox 1.4301 or 1.4307.
- Technopolymer flywheel with brass insert.
Technical data
DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
P35-418 | 432 | 25 | 5 | 62 | 562 | 4 | 10 | NA | NA | 0,3 | NA | sticked |