Série 43
Rectangular Flush Doors P43-031
P43-031 / P43-046
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel 2B plate 1.4301 / 1.4307 or 1.4404, height 66 mm, thickness 2 or 3 mm, useful passage with tolerance of /- 2 mm.
- Standard finish: microblasted, electropolished bib
- Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Stainless steel handwheel or lever in 1.4404, 1.4308, 1.4006, 1.4305 or 1.4301 with or without bronze insert according to model to be seen with the sales department.
Technical data
| DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
| P43-031 | 314x424 | 66 | 2 | 189 | 550 | 14 | NA | NA | 0,5 | NA | sticked | ||
| P43-046 | 405x530 | 66 | 3 | 189 | 640 | 16 | NA | NA | 0,5 | NA | sticked | ||
