Série 32
Clamp doors P32-305
P32-305 / P32-405 / P32-705 / P32-805
Finishes
Frame
Wicket door
Component parts
- Manufacturing crude without coating
- BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Stainless steel sheet 1.4301 / 1.4307 or 1.4404, height 80 mm, thickness 2 mm, usable passage with tolerance of /- 2 mm.
- Standard finish: electropolished
- Clamp
- Stainless steel 1.4301 or 1.4307.
- Handwheel or eccentric clamping lever in shiny chromium-plated brass-technopolymer handwheel with brass insert.
- Stainless steel handwheel or lever in 1.4404, 1.4308, 1.4006, 1.4305 or 1.4301 with or without bronze insert according to model to be seen with the sales department.
Technical data
DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
P32-305 | 300 | 80 | 2 | 103 | 363 | 3 | NA | NA | 1,2 | NA | clipped | ||
P32-405 | 400 | 80 | 2 | 103 | 463 | 5 | NA | NA | 1 | NA | clipped | ||
P32-705 | 500 | 80 | 2 | 145 | 563 | 8 | NA | NA | 1 | NA | clipped | ||
P32-805 | 600 | 80 | 2 | 142 | 663 | 10 | NA | NA | 0,6 | NA | clipped |