Série 11
Oval autoclave doors P11-340-440ED
Finishes
Frame
Wicket door
Component parts
- Raw from production without coating
- RAW Shot Blased : Sheets and rolled flat bars, wuth tool workings, weldings non pickeld.
- MICROBLES: Satin matte appearance.
- ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
- Height: 80 mm
- Hot rolled plate in stainless steel 1.4301 / 1.4307 or 1.4404, usable passage with tolerance of /- 2 mm.
- Standard finish: Microbeaded
- 3 mm 2B sheet in stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
- Stainless steel 1.4301 or 1.4307.
- Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department.
Technical data
DN Porte | Frame | Space requirement | Number of clamps | Unit weight in kg |
CALCULATION PRESSURE (non-FEP gasket) CODAP IN BAR at 150° (To be limited according to gasket material used) |
Pmax Maximum working pressure at room temperature (Bar) non-FEP joint. Door not submitted. |
Vacuum Absolute value in BAR (non-FEP joint ) |
Seals | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | C | E | B | D Dim hors tout |
Operating pressure 150°C | Test pressure 20°C | ASME 2007 in BAR at 150° without 'u' stamp | ||||||
P11-340-440ED | 340x440 | 80 | 4 | 183 | 450x550 | 1 | 12 | 2,4 | NA | 4 | NA | saddle |