Round sealing trapdoor P42-080

References:P42-080 / P42-081

Finishes : On steel or carbon :

On stainless steel :

Request a quote Standards and specifications : Normes et spécifications

Frame :

Stainless steel sheet 2B 1.4301 / 1.4307 or 1.4404, height 200 mm, thickness 3 mm, useful passage with tolerance of /- 2 mm.
Finish: bead blasted, visible vertical weld

Wicket door :

Component parts :

Stainless steel 1.4301 or 1.4307.
Stainless steel handwheel or lever in 1.4404, 1.4308, 1.4006, 1.4305 or 1.4301 with or without bronze insert according to model to be seen with the sales department.

Technical specifications

	DN Size	Frame		Space requirement		Number of clamps	Unit Weight in kg	CALCULATION PRESSURE (non FEP gasket) CODAP IN BAR at 150° (To be limited according to the gasket material used)			Pmax Maximum operating pressure at room temperature (Bar) non-FEP seal. Door not submitted.	Vacuum Vacuum pressure Absolute value in BAR (non-FEP seal)	Joints
	A	C	E	B	D Dim hors tout	Number of clamps	Unit Weight in kg	Operating pressure 150°C	Test pressure 20°C	ASME 2007 in BAR at 150° without the 'u' stamp			Joints
P42-080	790	200	3	270	884	8	28	NA	NA		0,1	NA	saddle
P42-081	790	200	3	270	928	8	28	NA	NA		0,1	NA	saddle

In the same category

Round sealing doors P42-021Ref:P42-021 / P42-021/70

Round sealing doors P42-020Ref:P42-020 / P42-020/70

Round sealing doors P42-1035Ref:P42-1035 / P42-1235 / P42-1435

Need specific dimensions, or a particular product?
Boyer makes your product to measure!

Our technical design office will accompany you from the conception to the realization of your project.