Home Trappes Pressureless hatchesNon-pressurized hatches P33-114
SERIE 33

Non-pressurized hatches P33-114

References:P33-114 / P33-255 / P33-315
Finitions : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Non-pressurized hatches P33-114
Frame :
  • Hot rolled or sheared plate in stainless steel 1.4301 / 1.4307 or 1.4404, height 60 mm, thickness 6 mm (255), 8 mm (114-315), usable passage with tolerance of /- 2 mm.
  • Standard finish : Polishing grain 50.
Wicket door :
  • Sheet 2B of 2.5 mm (114), 2 mm (255), 3 mm (315) stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel 1.4301 or 1.4307.
  • Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P33-1142046081542964NANA0,80,1clipped
P33-2552556061683706NANA0,4NAsticked
P33-3153546081774909NANA0,40,1clipped
In the same category
Non-pressurized hatches P33-150
Non-pressurized hatches P33-150Ref:P33-150 / P33-230 / P33-330 / P33-430 / P33-530 / P33-630
Non-pressurized hatches P33-196
Non-pressurized hatches P33-196Ref:P33-196 / P33-301 / P33-401 / P33-501 / P33-601
Non-pressurized hatches P33-212
Non-pressurized hatches P33-212Ref:P33-212 / P33-213

Need specific dimensions, or a particular product?
Boyer makes your product to measure!

Our technical design office will accompany you from the conception to the realization of your project.

Contact Us