Home Trappes Pressureless aseptic hatchesNon-pressure Aseptic Traps P31-240
SERIE 31

Non-pressure Aseptic Traps P31-240

References:P31-240 / P31-340 / P31-440 / P31-540 / P31-640
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Non-pressure Aseptic Traps P31-240
Frame :
  • Stainless steel sheet 1.4301 / 1.4307 or 1.4404, height 90 mm, thickness 2 mm, usable passage with tolerance of /- 2 mm.
  • Standard finish: exposed vertical weld, electropolished.
Wicket door :
  • Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel 1.4301 or 1.4307.
  • Technopolymer handwheel with brass insert.
  • Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P31-2402009022303204NANA0,1NAsaddle
P31-3403009022304205NANA0,1NAsaddle
P31-4404009022305208NANA0,1NAsaddle
P31-5404999022306199NANA0,1NAsaddle
P31-64059990223071811NANA0,05NAsaddle
In the same category
Non-pressure Aseptic Traps P31-200
Non-pressure Aseptic Traps P31-200Ref:P31-200 / P31-300 / P31-400 / P31-500 / P31-600
Non-pressure Aseptic Traps P31-080
Non-pressure Aseptic Traps P31-080Ref:P31-080 / P31-081
Non-pressure Aseptic Traps P31-935
Non-pressure Aseptic Traps P31-935Ref:P31-935 / P31-1235 / P31-1435

Need specific dimensions, or a particular product?
Boyer makes your product to measure!

Our technical design office will accompany you from the conception to the realization of your project.

Contact Us