SERIE 43

Rectangular Flush Doors P43-012

References:P43-012 / P43-015
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Rectangular Flush Doors P43-012
Frame :
  • Stainless steel 2B plate 1.4301 / 1.4307 or 1.4404, height 66 mm, thickness 2 or 3 mm, useful passage with tolerance of /- 2 mm.
  • Standard finish: microblasted, electropolished bib
Wicket door :
  • Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel flywheel or handle in 1.4404, 1.4308, 1.4006, 1.4305 or 1.4301 with or without bronze insert according to model to be seen with the sales department.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P43-012405x53066310746312NANA0,5NAsticked
P43-015420x3106621003839NANA1NAsticked
In the same category
Rectangular Flush Doors P43-010
Rectangular Flush Doors P43-010Ref:P43-010
Rectangular Flush Doors P43-047
Rectangular Flush Doors P43-047Ref:P43-047
Rectangular Flush Doors P43-031
Rectangular Flush Doors P43-031Ref:P43-031 / P43-046