SERIE 43

Rectangular Flush Doors P43-008

References:P43-008
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Rectangular Flush Doors P43-008
Frame :
  • Stainless steel sheet 2B 1.4301 / 1.4307 or 1.4404, height 66 mm, thickness 2 mm, useful passage with tolerance of /- 2 mm.
  • Standard finish: microblasted, electropolished bib
Wicket door :
  • Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Barrel Nut
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg		 CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)		 Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.		 Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)		 Joints
A C E B D
Dim hors tout		 Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P43-008310x420662114470x509410NANA0,5NAsticked
In the same category
Rectangular Flush Doors P43-010
Rectangular Flush Doors P43-010Ref:P43-010
Rectangular Flush Doors P43-047
Rectangular Flush Doors P43-047Ref:P43-047
Rectangular Flush Doors P43-012
Rectangular Flush Doors P43-012Ref:P43-012 / P43-015