SERIE 35

Powder Doors P35-418

References:P35-418
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Powder Doors P35-418
Frame :
  • Stainless steel plate 1.4301 / 1.4307 or 1.4404, height 25 mm, thickness 5 mm, useful passage with tolerance of /- 2 mm.
  • Standard finish: electropolished
Wicket door :
  • Sheet 2B 1.5 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Inox 1.4301 or 1.4307.
  • Technopolymer flywheel with brass insert.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg		 CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)		 Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.		 Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)		 Joints
A C E B D
Dim hors tout		 Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P35-41843225562562410NANA0,3NAsticked
In the same category
Powder Doors P35-307
Powder Doors P35-307Ref:P35-307
Powder Doors P35-315
Powder Doors P35-315Ref:P35-315