SERIE 32

Clamp doors P32-305

References:P32-305 / P32-405 / P32-705 / P32-805
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Clamp doors P32-305
Frame :
  • Stainless steel sheet 1.4301 / 1.4307 or 1.4404, height 80 mm, thickness 2 mm, usable passage with tolerance of /- 2 mm.
  • Standard finish: electropolished
Wicket door :
  • Clamp
Component parts :
  • Stainless steel 1.4301 or 1.4307.
  • Handwheel or eccentric clamping lever in shiny chromium-plated brass-technopolymer handwheel with brass insert.
  • Stainless steel handwheel or lever in 1.4404, 1.4308, 1.4006, 1.4305 or 1.4301 with or without bronze insert according to model to be seen with the sales department.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P32-3053008021033633NANA1,2NAclipped
P32-4054008021034635NANA1NAclipped
P32-7055008021455638NANA1NAclipped
P32-80560080214266310NANA0,6NAclipped
In the same category