SERIE 23

Rectangular Exterior Doors P23-580

References:P23-580
Finitions : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Rectangular Exterior Doors P23-580
Frame :
  • Hot rolled plate in stainless steel 1.4301 / 1.4307 or 1.4404, height 80 mm, thickness 8 mm, usable passage with tolerance of /- 2 mm.
  • Standard finish : Polishing grain 50.
Wicket door :
  • 3 mm 2B sheet in stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel 1.4301 or 1.4307.
  • Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P23-580500X80080813760544NANA0,15NAsticked
In the same category
Rectangular Exterior Doors P23-210
Rectangular Exterior Doors P23-210Ref:P23-210 / P23-211
Rectangular Exterior Doors P23-680
Rectangular Exterior Doors P23-680Ref:P23-680 / P23-810
Rectangular Exterior Doors P23-307
Rectangular Exterior Doors P23-307Ref:P23-307 / P23-308 / P23-312

Need specific dimensions, or a particular product?
Boyer makes your product to measure!

Our technical design office will accompany you from the conception to the realization of your project.

Contact Us