Home Portes Autoclave Door Rectangular autoclave doorsRectangular autoclave doors P13-105
SERIE 13

Rectangular autoclave doors P13-105

References:P13-105
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Rectangular autoclave doors P13-105
Frame :
  • Hot rolled plate in stainless steel 1.4301 / 1.4307 or 1.4404, height 60 mm, thickness 8 mm, usable passage with tolerance of /- 2 mm.
  • Standard finish : Polishing grain 50.
Wicket door :
  • Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel 1.4301 or 1.4307.
  • Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P13-105314x42460813838519NANA1,3NAsticked
In the same category
Rectangular autoclave doors P13-409
Rectangular autoclave doors P13-409Ref:P13-409 / P13-410

Need specific dimensions, or a particular product?
Boyer makes your product to measure!

Our technical design office will accompany you from the conception to the realization of your project.

Contact Us