SERIE 11

Oval autoclave doors P11-101

References:P11-101 / P11-103
Finishes : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Oval autoclave doors P11-101
Frame :
  • Standard height: 60 mm
  • Hot rolled plate in stainless steel 1.4301 / 1.4307 or 1.4404, usable passage with tolerance of /- 2 mm.
  • Standard finish: polished grain 50.
Wicket door :
  • Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel 1.4301 or 1.4307.
  • Stainless steel handwheel or lever in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg		 CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)		 Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.		 Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)		 Joints
A C E B D
Dim hors tout		 Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P11-101307x44260814537918NANA1,6NAsticked
P11-103442x30760814553119NANA1,6NAsticked
In the same category
Oval autoclave doors P11-340-440ED
Oval autoclave doors P11-340-440ED
Oval autoclave doors P11-410-510
Oval autoclave doors P11-410-510
Oval autoclave carriers P11-608
Oval autoclave carriers P11-608Ref:P11-608

Need specific dimensions, or a particular product?
Boyer makes your product to measure!

Our technical design office will accompany you from the conception to the realization of your project.

Contact Us