Home Portes Autoclave Door Autoclave doors in woodAutoclave doors for wooden tanks P41-040
SERIE 41

Autoclave doors for wooden tanks P41-040

References:P41-040
Finitions : On steel or carbon :
  • Manufacturing crude without coating
On stainless steel :
  • BURNISHING: Rolled sheets and flats, presence of tool marks, unstripped welds.
  • MICROBLES: Satin matte appearance.
  • ELECTROPOLISHING WITH Ra (µ): on request from < 1.6 to > 0.4.
Request a quote Standards and specifications : Normes et spécifications
Autoclave doors for wooden tanks P41-040
Frame :
  • Stainless steel sheet 2B 1.4301 / 1.4307 or 1.4404, height 50 mm, thickness 2 mm, useful passage with tolerance of /- 2 mm.
  • Standard finish: electropolished
Wicket door :
  • Sheet 2B 2 mm stainless steel 1.4301 / 1.4307 and 1.4404, electropolished.
Component parts :
  • Stainless steel flywheel or handle in 1.4401, 1.4404, 1.4305, 1.4301 or 1.4307 with or without bronze insert according to model to be seen with the sales department.
Technical specifications
DN Size Frame Space requirement Number of clamps Unit Weight
in kg
CALCULATION PRESSURE (non FEP gasket)
CODAP IN BAR at 150°
(To be limited according to the gasket material used)
Pmax
Maximum operating pressure
at room temperature (Bar) non-FEP seal.
Door not submitted.
Vacuum
Vacuum pressure
Absolute value in BAR
(non-FEP seal)
Joints
A C E B D
Dim hors tout
Operating pressure 150°C Test pressure 20°C ASME 2007 in BAR at 150° without the 'u' stamp
P41-040 305x44050282363x4836NANA1NAsticked
In the same category